53608(F134A3) Product Characteristics Simple structure and reliable sealing It adopts hermetic head faces with high degree pottery and corrosion resistance for opening and closing. No water passes the valve in regeneration in single tank type Manual function Realize regeneration immediately by pressing “Manual/Return” at any time. Reserved pressure gauge connector There is a pressure gauge connector reserved at the water inlet, drill and fit on the pressure gauge when you need. Long outage indicator If outage overrides 3 days, the time of day indicator “12:12” will flash to remind people to reset new time of day. The other set parameters do not need to reset. The process will continue to work after power on. LED dynamic screen display The stripe on dynamic screen flash, it indicates the control valve is in service, otherwise, it is in regeneration cycle. Buttons lock No operations to buttons within 1 minute, button lock indicator lights on which represents buttons are locked. Before operation, press and hold the “Up” and “Down” buttons for 5 seconds to unlock. This function can avoid incorrect operation. It can choose valve model by program selection When all symbols light on, press and hold Menu/Confirm and Manual/Return buttons more than 2 seconds to enter the menu of valve model selection. Press “Up” or “Down” buttons to select the requested model, then press Menu/Confirm button to save the selection. Reconnect the power, the model will be showed on screen. Interlock function It has a function of interlock to realize only one valve in regeneration but the other valves are in service while several valves parallel in system. In multi-steps treatment systems such as RO pre-treatment, when several valves are in series, there is only one valve in regeneration or washing to ensure pass water all the times while different valves in regeneration or washing.
